Deep BreathHouse CleaningGet a quote

Post-construction cleaning after a remodel

Remodeling leaves a fine dust that gets everywhere: inside cabinets and drawers, on top of door frames, in window tracks, in vents, on walls. It settles again after you wipe it, so one pass is not enough. Post-construction cleaning is the detailed cleanup after the tradespeople finish and before you move back into the space.

A steel shop vacuum on the wood floor of a freshly renovated room, hose stretched out.

This is cleaning, not debris removal. It starts once tools, scrap and large trash are gone.

What post-construction cleaning covers

The list depends on what was built. Tell us the rooms and ask for a quote on those.

Dust, top to bottom

  • Ceiling corners, light fixtures and vents dusted
  • Walls dry-dusted where needed
  • Tops of doors, frames, trim and baseboards wiped
  • Inside cabinets, drawers and closets vacuumed and wiped

New surfaces

  • Stickers and protective film removed from windows, appliances and fixtures
  • Paint specks and adhesive taken off glass and tile, where it can be done safely
  • Counters, sinks, tubs and fixtures cleaned and polished
  • Window sills, tracks and inside glass

Floors

  • Vacuumed with attention to edges and corners
  • Hard floors damp-mopped, often more than once
  • Haze wiped from new tile, if it comes up with normal cleaning

What it does not cover

  • Hauling lumber, drywall, tile scraps or bags of debris. A junk removal company does that.
  • Heavy grout haze, cured paint or glue that needs chemical or machine removal
  • Outside windows, siding, gutters and pressure washing
  • Duct cleaning
  • Work on an active job site. The trades need to be done first.

How long it takes

This is slow work, because dust keeps settling for a while after the first pass. A single remodeled bathroom is a short job. A whole floor or a gutted kitchen is a long one, and it is sometimes done as a rough clean followed by a final clean on a later day. Tell us which rooms were worked on and which rooms just caught dust.

What changes the price

  • Size of the area that was worked on, and how far the dust traveled
  • Kind of work done. Drywall sanding and floor refinishing make the most dust.
  • Amount of new glass, tile and cabinetry
  • Whether one clean or two passes are needed
  • Whether the space is empty or furnished

How quotes are worked out

How to get ready

  • Make sure the contractor is fully done, including touch-up paint.
  • Have debris, tools and materials removed.
  • Have water and power on.
  • Ask your installer how soon new floors, stone or grout can be cleaned, and tell us of any products to avoid.
  • Change the furnace filter after the clean, since it will have caught a lot of dust.

Who this is for

Homeowners after a kitchen, bath or basement remodel. Buyers of a newly built or flipped home who find dust in every drawer. Small contractors who want the space handed over clean. For commercial build-outs, send a note through the commercial page.

Questions about post-construction cleaning

Does my contractor not clean up?
Most contractors leave a space broom clean: swept, with debris gone. That is not the same as dust-free. Check your contract, then decide whether you want a detailed clean on top.
Can you remove paint or grout haze from new tile?
Light haze and small paint specks often come off with normal cleaning. Heavy haze or cured product may need a method your tile installer should choose. A provider should not risk a new surface. Ask what they will and will not touch before you agree.
When should the cleaning happen?
After the last trade is done and before furniture goes back. If painters or floor finishers are coming back, wait for them.
Why does dust come back after cleaning?
Fine dust hangs in the air and in the ducts, then settles over the next days. That is why bigger jobs get two passes, and why a new furnace filter helps.

How it works

  1. Send the form. It takes about a minute. Tell us about your home and what you need.
  2. Get a quote. We try to connect you with an independent provider for your address. You hear back by email about a quote.
  3. Pick a day. If the quote works for you, a day is set with the provider. First check who will collect payment.

Related

Areas: Chicago, Schaumburg, Aurora. All services.

Ready to ask for a quote?

About a minute to fill in. We try to connect you with an independent local cleaner, and you hear back by email about a quote. Nothing is booked until you say yes.

Get a quote

  1. 1 About your home
  2. 2 Where to send the quote